The setup and connection procedures for the Belkin Plug-In Wi-Fi Vary Extender mannequin F9K1122v1 , illustrate simplicity itself when you could have display photographs from an precise setup state of affairs, as we took right here, whereas connecting our model one copy to our present wi-fi networks.
The Belkin firmware automates a lot of the process in a wizard type net interface as you’ll see under. Almost all you must do is reply a number of questions; most of which they provide with acceptable default values. Then, you discover your networks to be prolonged in an inventory they supply, enter their passwords, and this extender takes it from there. It connects to your chosen Wi-Fi networks and repeats them; extending their vary as marketed.
Belkin F9K1122v1 W-iFi vary extender, working usually, displaying strong blue mild, entrance view.
The image above exhibits the F9k1122v1, related to and increasing our Wi-Fi community. The standing lamp on the entrance (middle on this image), glows a strong blue, indicating reception of good sign from the first community(s) beforehand programmed into it, and repeating them as anticipated. On this process, we’re going to wipe it clear of any user-programmed settings, and present you the best way to program it, “from the bottom up,” to increase the networks in your specific setting.
- 1 Belkin F9K1122v1 Extender Setup Directions
- 1.1 1. Reset the F9k1122v1 to Default Manufacturing unit Values
- 1.2 2. Plug the Belkin Extender into an Outlet that’s Near your Most important Router
- 1.3 three. Scan for the Belkin.Setup Wi-Fi Community
- 1.4 four. Faucet the Belkin.setup Community
- 1.5 5. Faucet the Get Began Button
- 1.6 6. Look forward to Wi-fi Community Scan to Full
- 1.7 7. Choose the Wi-Fi Community that you simply Need to Prolong
- 1.8 eight. Enter the Password in your Chosen 2.four Ghz. Community
- 1.9 9. Then Press the Subsequent Button
- 1.10 10. Press the Subsequent Button
- 1.11 11. Confirm Accuracy of your Prolonged Networks Information
- 1.12 12. Confirm that you simply See the “Your extender is now configured…” Display
- 1.13 13. Accomplished
- 2 Qualifiers and Disclaimers
- 3 Advised Studying
- 4 References
- 5 Revision Historical past
Belkin F9K1122v1 Extender Setup Directions
1. Reset the F9k1122v1 to Default Manufacturing unit Values
Chances are you’ll skip forward to step 2 in the event you bought F9k1122v1 model new.
Nevertheless, you’ll need to RESET this gadget in case you purchased a used one, simply in case the vendor didn’t filter out their customizations. Comply with the directions in our Belkin Wi-Fi Vary Extender Reset Directions article.
2. Plug the Belkin Extender into an Outlet that’s Near your Most important Router
Throughout setup, the F9K1122v1 ought to be bodily near the Wi-Fi entry level you’re extending. We situate ours in the identical room as the first router, just some ft away from it. As soon as setup is full, you’ll be able to then transfer the extender to the place the place you want improved Wi-Fi sign, as long as the extender can nonetheless talk with the first router.
three. Scan for the Belkin.Setup Wi-Fi Community
As soon as the F9K1122v1 boots (takes roughly thirty seconds), go to your pc or cellular gadget and scan for the Belkin.setup Wi-Fi community. We discovered it on our iPad Air, as pictured subsequent. This setup entry level is just lively in the course of the setup course of, and can disappear when you’ve completed configuring the extender.
Belkin.Setup Wi-Fi community, as seen on iPad Air pill.
four. Faucet the Belkin.setup Community
Since it’s OPEN, you’ll not be prompted for a password. On the iPad Air, we be a part of it just by single-tapping it.
As soon as related, the Belkin.vary entrance web page comes up routinely, as proven subsequent. If it doesn’t seem, then direct your net browser on the gadget you’re configuring with, to http://belkin.range/ . As soon as that web page got here up, we needed to scroll down a bit on this web page to see the Get Began button.
Belkin F9K1122v1 Wi-Fi vary extender, displaying the -Setup-Get Began- web page on iPad Air.
5. Faucet the Get Began Button
This instructs the F9K1122v1 to scan each the two.four and 5 Ghz. bands for eligible Wi-Fi networks to increase and repeat.
Belkin F9K1122v1 Wi-Fi vary extender, displaying the -Scanning for Wi-fi Networks to Prolong- display.
6. Look forward to Wi-fi Community Scan to Full
Whereas the F9K1122v1 scans for networks, you’ll see the Looking for SSID display, proven above.
After a number of seconds, the F9K1122v1 shows an inventory of in-range wi-fi networks it present in your space, as proven subsequent.
Belkin F9K1122v1 Wi-Fi vary extender, displaying the -Select Wi-fi Community- immediate display, with 5 Ghz. chosen, and a couple of.four Ghz. arrowed.
7. Choose the Wi-Fi Community that you simply Need to Prolong
On this state of affairs, our 5 Ghz. community is chosen by default (highlighted in blue). However we’re solely going to increase our 2.four Ghz. community right here, for brevity. So, we faucet the 937T681J4059H_2G community, which then is highlighted in blue, as proven subsequent.
Belkin F9K1122v1 Wi-Fi vary extender in setup mode, displaying the -Choose Wi-fi Community to Prolong- display, with the two.four Ghz. community chosen.
Nevertheless, in case you are extending a 5 Ghz. community, simply repeat this step for that community when you check in to your 2.four Ghz. community, as illustrated under.
Word that in case your community doesn’t show within the above record, it might be hidden. In that case, press the “I need to hook up with a hidden community” button, and comply with the directions for guide entry of your community’s SSID, safety sort, and password.
Your community(s) can also fail to point out up right here in the event that they’re bodily too distant from this vary extender. Their alerts might subsequently be too weak. To unravel this drawback, transfer the extender nearer to your main Wi-Fi entry level. After it boots up, faucet / click on the “Refresh” button above, to pressure the vary extender to rescan for eligible networks to increase.
Nevertheless, in case you do see your community, as we see our 937T681J4059H_2G community above, faucet its entry within the listing to pick it, after which faucet the “Subsequent” button. The password entry display then seems, as displayed within the subsequent display shot.
Belkin F9K1122v1 Wi-Fi vary extender in setup mode, displaying the two.four Ghz. community password immediate display.
eight. Enter the Password in your Chosen 2.four Ghz. Community
Enter your main community password for the 2.four Ghz. Wi-Fi community that you simply’re extending. Warning: Your password will clearly show on this display as you enter it, so do that step the place nobody will see it that you simply’d moderately NOT have see it.
When all password characters have been entered, look at intently what you typed in for correctness.
Warning: Ensure the password is right earlier than urgent the “Subsequent” button above. Our expertise with the 1.00.16 model of this firmware, utilizing our iPad Air to configure this, is that if the password is mistaken, you’ll be disconnected from the Belkin.setup Wi-Fi community. If you attempt connecting once more, you’ll be repeatedly disconnected, and might be unable to complete the setup, forcing you to start out over by urgent the exhausting RESET button on the again.
9. Then Press the Subsequent Button
This shows the “Checking the password” display, whereas the vary extender makes an attempt to hook up with the first 5 Ghz. community that you simply’ve chosen beforehand. A spinning progressing circle shows whereas these behind-the-scenes operations happen, once more, as proven subsequent.
Belkin F9K1122v1 Wi-Fi vary extender in setup mode, displaying the -Checking Wi-fi Community Password- display.
Then, as soon as the password is verified for the two.four Ghz. prolonged community, you’re taken again to the display the place you’ll be able to select to increase a 5 Ghz. community for those who so want. In case you do want this, repeat steps six by means of eight above for that community.
Belkin F9K1122v1 Wi-Fi vary extender in setup mode, displaying the -Select 5 Ghz. Wi-fi Community- immediate display.
Word that the I are not looking for or want to increase a 5ghz community choice is already highlighted in blue. If yours just isn’t, and you don’t want to increase any 5 Ghz. networks, then faucet this bar. It ought to then flip blue.
10. Press the Subsequent Button
The extender then shows a display that exhibits the details about the two.four Ghz. community that it’ll prolong when setup is full, just like that proven within the subsequent screenshot. It exhibits the SSID of the unique Wi-Fi community and the password used to entry it.
Belkin F9K1122v1 Wi-Fi vary extender in setup mode, displaying the -Prolonged Community Info- display.
11. Confirm Accuracy of your Prolonged Networks Information
Word that we’ve coated our entered passwords with “pink paint,” to maintain them safe. Verify the introduced internet knowledge one last time, jus to ensure all is true.
You could select to edit this knowledge (change the SSIDs of the community extensions for instance) by urgent the “Edit” button after which, following the directions.
Or, you possibly can select to utterly scrap all the knowledge entered on this whole process, by tapping the “Begin Over” button, after which leaping again to step 2 to re enter the whole lot.
Nevertheless, if the two.four Ghz. and 5 Ghz. community info displayed within the “Prolonged Community info” display seems to be okay, then faucet the “Create Prolonged Networks” button. This brings the brand new Wi-Fi networks “on the air,” and takes you to the ultimate display on this Wi-Fi vary extender setup.
12. Confirm that you simply See the “Your extender is now configured…” Display
If all went nicely, then after a brief pause, the Prolonged Networks Configuration Achieved display seems, as proven subsequent. This web page exhibits you the SSIDs, safety varieties, and passwords of the prolonged networks you simply arrange.
Belkin F9K1122v1 Wi-Fi vary extender in setup mode, displaying the -Extender Now Configured- display.
You could print this info by urgent the Print Prolonged Community Info button.
Do that shortly although, as this display occasions out after roughly fifteen seconds, and disappears together with the Belkin.setup short-term community, which once more, is provided by the F9K1122v1 solely throughout setup.
Take pleasure in! You’ve now efficiently setup your Belkin Wi-Fi Vary Extender mannequin F9K1122v1. Have enjoyable!
Qualifiers and Disclaimers
- This process was written utilizing Belkin firmware variations 1.zero.16 and 1.zero.30.
Revision Historical past
- 2019-04-24: Added key phrase concentrating on, shortened submit URL, and added tags.
- 2017-02-28: Initially revealed.