Right here, we show the Cost three Firmware Replace on the JBL Cost three Bluetooth speaker. This improve can take as much as thirty minutes relying on the velocity of your web connection. Plus, it can’t simply be undone. You gained’t have the ability to return to the earlier firmware model when you full this software program improve. So, ensure that you certainly want the improve and have thought-about all of its ramifications earlier than continuing.
- 1 Put together for Cost three Firmware Replace
- 2 Cost three Firmware Replace, How To
- 2.1 1. Discover the JBL Join+ App in your Cellular System
- 2.2 2. Run the JBL Join+ (JBL Join Plus) App
- 2.3 three. Faucet the Orange Circled Rationalization Level (!)
- 2.4 four. Flick to the Left to See the Subsequent IMPORTANT NOTICE Web page
- 2.5 5. Flick As soon as Extra to the Left to See the Subsequent IMPORTANT NOTICE Web page
- 2.6 6. Faucet the INSTALL Button
- 2.7 7. Join the Cost three to AC Energy if Not Carried out Already
- 2.8 eight. Faucet the OK Button
- 2.9 8a. Cost three Firmware Replace Begins
- 2.10 8b. Cost three Firmware Replace at Forty % Full
- 2.11 8c. Cost three Firmware Replace at 65.7 % Achieved
- 2.12 8d. Firmware Improve File Switch 100 % Full
- 2.13 9. Await the Cost three to Shut Off
- 2.14 10. Energy On the Cost three
- 2.15 11. Press the Finished Button
- 2.16 12. Carried out!
- 3 Associated Posts
- 4 References
- 5 Revision Historical past
Put together for Cost three Firmware Replace
You’ll want and web connection, a Bluetooth enabled cellular or desktop pc gadget, and the JBL Join Plus (Join+) app, in addition to the Cost three speaker itself.
So, get your cellular gadget related to the web and set up the Join+ app in the event you haven’t already.
Join your Cost three to AC energy. Why? As a result of we don’t need its battery energy financial institution going lifeless in the course of the replace. This mishap might depart a corrupted model of the firmware within the speaker’s reminiscence, and brick the speaker, rendering it ineffective and never repairable.
Then, pair your cellular gadget with the Cost three Bluetooth speaker.
You at the moment are prepared to start the firmware updating course of on that JBL Bluetooth speaker.
Cost three Firmware Replace, How To
1. Discover the JBL Join+ App in your Cellular System
We discovered ours on the fourth residence web page in our Apple iPad Air, as proven subsequent.
Cost three Firmware Replace: iOS 11 residence display, displaying the JBL Join app highlighted.
2. Run the JBL Join+ (JBL Join Plus) App
The app takes a couple of seconds to point out you some fairly animations whenever you first begin it. However then it locates your paired Cost three Bluetooth speaker and exhibits you its standing display, as proven subsequent.
Word the reason level contained in the orange circle within the prime proper nook of the speaker’s image, as pointed at by the darkish inexperienced arrow. Which means there are essential messages about this speaker pending on your to learn and act upon.
Cost three Firmware Replace: JBL Join Plus app on iOS. Displaying the Cost three speaker, needing a firmware replace. Notification image for that’s highlighted.
Word that if there are not any present messages or firmware updates out there for this specific wi-fi speaker, then you will notice no rationalization level.
three. Faucet the Orange Circled Rationalization Level (!)
Tapping the Necessary Messages (!) circle brings up the primary IMPORTANT NOTICE display concerning the obtainable firmware improve, as proven subsequent.
Cost three Firmware Replace: JBL Join Plus app on iOS. Related to a Cost three speaker. Displaying first necessary discover about upgrading the firmware on this related Bluetooth speaker.
This display provides particulars concerning the out there firmware replace. In our case right here, it tells us that we’d like this improve to allow JBL Join+ performance on our Cost three speaker. Particularly, this software program improve enhances the speaker operation by permitting it to attach into a gaggle of as much as 100 JBL Join+ suitable wi-fi audio system, such that all of them stream the identical content material, in synchronization with one another. You’d do that whenever you want to blanket a big space with music for dancing for instance.
four. Flick to the Left to See the Subsequent IMPORTANT NOTICE Web page
Cost three Firmware Replace: JBL Join Plus app on iOS, paired with a Cost three speaker. Displaying the 2nd essential discover, warning about this firmware replace being everlasting and thus, not reversible.
This web page warns us that this specific speaker firmware can’t be undone, and that when completed, this software program improve is everlasting within the speaker. It additionally says that after this improve, the speaker we’re updating will not be capable of join with different Cost three Bluetooth audio system which are operating older variations of the firmware. Additionally, you will lose connectivity with older audio system such because the JBL Flip three, JBL Pulse 2, JBL Xtreme, JBL Increase, and Cinema 5B450.
5. Flick As soon as Extra to the Left to See the Subsequent IMPORTANT NOTICE Web page
One other left flick brings up the Cost three firmware improve affirmation immediate display, as proven subsequent.
Cost three Firmware Replace: JBL Join Plus app on iOS, paired with a Cost three Bluetooth speaker. Prompting for firmware replace affirmation. You have to faucet the Set up button to go forward with the firmware set up.
This immediate once more warns us that we gained’t have the ability to fall again to the previous firmware model as soon as this improve is full. It then asks us to determine whether or not to put in the brand new firmware or to cancel out. We’re going forward, within the subsequent step.
6. Faucet the INSTALL Button
Touching the INSTALL button brings up the Improve Speaker display as proven subsequent.
Cost three Firmware Replace: JBL Join Plus app on iOS, related with a Cost three speaker. Prompting to plug within the speaker to AC energy to replace its firmware.
This web page tells us to attach our Cost three speaker to AC energy if we’ve not carried out so already (You’d have already executed this in case you have been following the directions within the preliminaries part above).
7. Join the Cost three to AC Energy if Not Carried out Already
We related our Cost three to an AC outlet by way of the included energy adapter and cable, as proven within the subsequent image.
Cost three Firmware Replace: Cost three wi-fi speaker, charging. Displaying all connections for recharging this energy financial institution speaker. The AC adapter is plugged Into wall, and related to the speaker by way of the USB A to micro USB male cost cable.
eight. Faucet the OK Button
Subsequent, return to the JBL Join+ app operating in your cellular system, and faucet the OK button. See this button within the final screenshot image.
The firmware replace then begins, with the obtain of the firmware replace file from the web, by way of your cellular system, to the speaker by way of the Bluetooth connection, as proven within the subsequent screenshots.
Cost three Firmware Replace: JBL Join Plus app on iOS, related with a Cost three Bluetooth speaker. Displaying the -Transferring Firmware Replace File- web page as the brand new firmware file is copied from the cellular gadget to the speaker.
8a. Cost three Firmware Replace Begins
Copying the file from the web to the speaker is the slowest a part of the firmware improve course of. However as proven in these screenshots, the JBL Join+ app exhibits you a progress pie-chart image, that regularly turns into extra orange because the firmware file switch proceeds.
Cost three Firmware Replace: JBL Join Plus app on iOS, paired with a Cost three waterproof speaker. Transferring replace firmware file to that speaker, 40 % accomplished.
8b. Cost three Firmware Replace at Forty % Full
We’re in all probability about fifteen minutes into the firmware replace at this level within the course of.
Cost three Firmware Replace: JBL Join Plus app on iOS, linked by way of Bluetooth with a Cost three splashproof speaker. Transferring new firmware file, 65 % full.
8c. Cost three Firmware Replace at 65.7 % Achieved
The subsequent display exhibits that the firmware file switch to the speaker has completed (100 % accomplished). The pie chart is totally orange now.
Cost three Firmware Replace: JBL Join Plus app on iOS, paired with a Cost three moveable speaker. Transferring new firmware replace file to that speaker, 100 % completed.
8d. Firmware Improve File Switch 100 % Full
As soon as the app copies the improve file to the Cost three speaker, you get the Improve Profitable display, as proven subsequent. Nevertheless, notice that the Cost three continues to be upgrading to the brand new firmware for almost a minute after you first see this inexperienced and white display. Thus, this display warns us that our speaker will restart mechanically, and it asks us to not unplug the Cost three whereas it’s operating the replace course of.
Cost three Firmware Replace: JBL Join Plus app on iOS, paired with a Cost three Bluetooth speaker and energy financial institution. The brand new firmware replace to the speaker is profitable. Achieved button highlighted.
9. Await the Cost three to Shut Off
Watch the facility mild on the speaker, as proven subsequent. Ultimately it is going to go darkish, as proven subsequent, pointed at by the inexperienced arrow.
Cost three Firmware Replace: Cost three Bluetooth speaker, powered off. Displaying the Energy button highlighted.
The speaker might or might not flip itself again on once more. Ours didn’t. If, like ours, yours didn’t come again up after the firmware improve, then go forward with the subsequent step (Step 10). But when yours did come again on-line although, then skip Step 10 and decide up with Step 11.
10. Energy On the Cost three
Press the darkish Energy button to show this Bluetooth speaker on once more. It ought to once more pair together with your cellular system the place you’re operating the JBL Join Plus app. The Energy button turns strong blue together with your speaker has efficiently paired once more together with your pill or telephone, as proven subsequent.
Cost three Firmware Replace: Cost three IPX7 licensed moveable Bluetooth speaker, powered on and paired. Energy button is glowing blue and highlighted.
11. Press the Finished Button
Together with your Cost three efficiently paired to the JBL Join+ app once more, press the inexperienced Achieved button, as proven within the final screenshot.
The app then shows the Cost three standing display as soon as once more. Nevertheless, this time, notice that there’s not the orange circled rationalization level (!), as proven subsequent. This means that the firmware replace succeeded and that the speaker is now operating the present firmware model.
Cost three Firmware Replace: JBL Join Plus app on iOS, linked with a Cost three splashproof speaker. The firmware replace to that Bluetooth speaker is completed. No newer firmware model out there.
12. Carried out!
You’re now efficiently up to date the firmware to the present model in your Cost three Bluetooth speaker. Take pleasure in the brand new multi speaker connectivity options.
Revision Historical past
- 2018-12-12: First revealed.