Audio Bluetooth Speakers Firmware Firmware Update Instructions JBL JBL Firmware Update JBL Xtreme JBL Xtreme Instructions Tech update Xtreme

JBL Xtreme Firmware Update Instructions

Screenshot of the iOS 11 home screen, showing the JBL Connect app highlighted.

Right here, we provide JBL Xtreme firmware replace directions for this nice sounding moveable Bluetooth speaker. This replace can take as much as thirty minutes relying on the velocity of your web connection. Plus, you can’t simply reverse it. You gained’t be capable of downgrade to the sooner firmware model when you full this software program improve. So, ensure that you really want the improve, contemplating all its potential gotchas earlier than continuing.

Contents

Disclaimers

We have been unable to replace our JBL Xtreme firmware once we acquired this speaker on the time of this writing.  Why?  As a result of the firmware there was already on the present model.  So, we borrowed some footage under from the firmware updates we did on our JBL Cost three speaker.  We used footage of the Xtreme speaker the place we might nevertheless.  The firmware replace processes are comparable for each audio system.  Lastly, if or once we obtain an precise firmware replace notification for our Xtreme, we’ll replace these photographs to point out the precise replace in progress.

Put together for JBL Xtreme Firmware Replace

Get Related to the Web

You’ll want and web connection, a Bluetooth enabled cellular or desktop pc gadget, and the JBL Join Plus (Join+) app, in addition to the JBL Xtreme speaker itself.

Set up the Join+ App

So, get your cellular system related to the web and set up the Join+ app for those who haven’t already.

Plug your JBL Xtreme into Dependable AC or Automotive Energy

Join your Xtreme to AC energy. Why? As a result of we don’t need its inner battery going lifeless through the firmware replace. This mishap might depart corrupted firmware within the speaker’s reminiscence, and thus, render it ineffective and never repairable.

Pair your Speaker together with your Web Related Cellular System

Then, pair your telephone or pill with the Xtreme JBL speaker.

You at the moment are prepared to start the firmware updating course of on that JBL Bluetooth speaker.

JBL Xtreme Firmware Replace, How To

1. Discover the JBL Join+ App in your Cellular Gadget

We discovered ours on the fourth residence web page in our Apple iPad Air, as proven subsequent.

JBL Xtreme Firmware Replace: iOS 11 residence display, displaying the JBL Join app highlighted.

2. Run the JBL Join+ (JBL Join Plus) App

The app takes a couple of seconds to point out you some nifty animations once you first begin it. However then it finds your paired JBL Xtreme speaker and exhibits you its standing display, as proven subsequent.

Notice the reason level contained in the orange circle within the prime proper nook of the speaker’s image, as pointed at by the darkish inexperienced arrow. Which means there are necessary messages about this speaker pending on your to learn and act upon.

Screenshot of the JBL Connect Plus app on iOS. Showing similar screen to the the JBL Xtreme speaker, needing a firmware update. Notification symbol for that is highlighted.JBL Xtreme Firmware Replace: Just like JBL Join Plus app on iOS. Displaying the Xtreme speaker, needing a firmware replace. Notification image for that’s highlighted.

Notice that if there are not any present messages or firmware updates obtainable for this specific wi-fi speaker, then you will notice no rationalization level.  Additionally notice that the above image, whereas it applies to the Cost three speaker, is just like what you’d see with the JBL Xtreme.

three. Faucet the Orange Circled Rationalization Level (!)

Tapping the Essential Messages (!) circle brings up the primary IMPORTANT NOTICE display concerning the out there firmware improve, as proven subsequent.

Screenshot of the JBL Connect Plus app on iOS. Connected to a Charge 3 speaker. Displaying first important notice about upgrading the firmware on this connected Bluetooth speaker. JBL Xtreme Firmware Replace: JBL Join Plus app on iOS. Displaying first necessary discover about upgrading the firmware on this related Bluetooth speaker.

This display provides particulars concerning the out there firmware replace. In our case right here, it tells us that we’d like this improve to allow JBL Join+ performance on our Xtreme speaker. Particularly, this software program improve enhances the speaker operation by permitting it to attach into a gaggle of as much as 100 JBL Join+ suitable wi-fi audio system, such that all of them stream the identical content material. You’d do that if you want to blanket a big space with music for dancing for instance.

four. Flick to the Left to See the Subsequent IMPORTANT NOTICE Web page

Screenshot of the JBL Connect Plus app on iOS. Displaying the 2nd important notice, warning about this firmware update being permanent and thus, not reversible.JBL Xtreme Firmware Replace: JBL Join Plus app on iOS, just like what it might seem like when paired with an Xtreme speaker. Displaying the 2nd essential discover, warning about this firmware replace being everlasting and thus, not reversible.

This web page warns us that this specific speaker firmware can’t be undone, and that when completed, this software program improve is everlasting within the JBL Xtreme. It additionally says that after this improve, the speaker will not be capable of join with different Xtreme Bluetooth audio system which might be operating older variations of the firmware. Additionally, you will lose connectivity with older audio system such because the JBL Flip three, JBL Pulse 2, JBL Xtreme, JBL Increase, and Cinema 5B450.

5. Flick As soon as Extra to the Left to See the Subsequent IMPORTANT NOTICE Web page

One other left flick brings up the JBL Xtreme firmware improve affirmation immediate display, as proven subsequent.

Screenshot of the JBL Connect Plus app on iOS, prompting for firmware update confirmation. You must tap the Install button to go ahead with the firmware installation. JBL Xtreme Firmware Replace: JBL Join Plus app on iOS, just like how it might look when paired with a JBL Xtreme Bluetooth speaker. Prompting for firmware replace affirmation. It’s essential to faucet the Set up button to go forward with the firmware set up.

This immediate once more warns us that we gained’t be capable of fall again to the previous firmware model as soon as this improve finishes. It then asks us to determine whether or not to put in the brand new firmware or to cancel the operation. We’re going forward, within the subsequent step.

6. Faucet the INSTALL Button

Touching the INSTALL button brings up the Improve Speaker display as proven subsequent.

Screenshot of the JBL Connect Plus app on iOS, prompting to plug in the speaker to AC power to update its firmware.JBL Xtreme Firmware Replace: JBL Join Plus app on iOS, related with an Xtreme speaker. Prompting to plug within the speaker to AC energy to replace its firmware.

This web page tells us to attach our Xtreme speaker to AC energy if we’ve not carried out so already (You’d have already carried out this for those who have been following the directions within the preliminaries part above).

7. Join the JBL Xtreme to AC Energy if Not Executed Already

We related our Xtreme to an AC outlet within the preliminary firmware replace steps above, by way of the included energy adapter and cable, as proven within the subsequent image.

Picture of the JBL Xtreme speaker plugged in and charging from AC power.JBL Xtreme Firmware Replace: JBL Xtreme speaker plugged in and charging from AC energy.

eight. Faucet the OK Button on the Improve Speaker Display

Subsequent, return to the JBL Join+ app operating in your cellular gadget, and faucet the OK button. See this button within the final screenshot image above.

The JBL Xtreme firmware replace then begins, with the obtain of the software program improve file from the web, by means of your cellular gadget, to the speaker by way of the Bluetooth connection, as proven within the subsequent screenshots.

Screenshot of the JBL Connect Plus app on iOS, displaying the -Transferring Firmware Update File- page as the new firmware file is copied from the mobile device to the speaker. JBL Xtreme Firmware Replace: JBL Join Plus app on iOS, related with a JBL Xtreme Bluetooth speaker. Displaying the -Transferring Firmware Replace File- web page as the brand new firmware file is copied from the cellular system to the speaker.

8a. The JBL Xtreme Firmware Replace Course of Begins

Copying the file from the web to the speaker is the slowest a part of the firmware improve course of. However as proven in these screenshots, the JBL Join+ app exhibits you a progress pie-chart image, that steadily turns into extra orange because the firmware file switch proceeds.

8b. JBL Xtreme Firmware Replace at Forty % Full

This was in all probability round fourteen minutes into the firmware replace at this level within the course of.

Screenshot of the JBL Connect Plus app on iOS, transferring update firmware file to that speaker, 40 percent done.JBL Xtreme Firmware Replace: JBL Join Plus app on iOS, paired with a JBL Xtreme speaker. Transferring replace firmware file to that speaker, 40 % achieved.

8c. JBL Xtreme Firmware Replace at 65.7 % Finished

The subsequent screenshot exhibits the improve file switch at 65.7 % full.

Screenshot of the JBL Connect Plus app on iOS, transferring new firmware file, 65 percent complete. JBL Xtreme Firmware Replace: JBL Join Plus app on iOS, linked by way of Bluetooth with a JBL Xtreme splashproof speaker. Transferring new firmware file, 65 % full.

8d. Firmware Improve File Switch 100 % Full

The subsequent display exhibits that the firmware file switch to the speaker has completed (100 % carried out). The pie chart is totally orange now.

Screenshot of the JBL Connect Plus app on iOS, transferring new firmware update file to that speaker, 100 percent done.JBL Xtreme Firmware Replace: JBL Join Plus app on iOS, paired with an Xtreme moveable speaker. Transferring new firmware replace file to that speaker, 100 % accomplished.

8e. The Improve Profitable Display Seems

As soon as the app copies the improve file to the Xtreme speaker, you get the Improve Profitable display, as proven subsequent.

Nevertheless, notice that the JBL Xtreme continues to be upgrading to the brand new firmware for almost a minute after you first see this inexperienced and white display. Thus, this display warns that our speaker will restart mechanically after it installs the brand new firmware.  It then asks us to not unplug the Xtreme whereas it’s operating the replace course of.

Screenshot of the JBL Connect Plus app on iOS, showing that the new firmware update to the speaker is successful. Done button highlighted. JBL Xtreme Firmware Replace: JBL Join Plus app on iOS, paired with a JBL Xtreme Bluetooth speaker. The brand new firmware replace to the speaker is profitable. Carried out button highlighted.

9. Look forward to the JBL Xtreme to Shut Off

Watch the facility mild on the speaker, as proven subsequent.

Picture of the JBL Xtreme Bluetooth speaker powered on and paired, with its blue glowing Power button highlighted.JBL Xtreme Firmware Replace: JBL Xtreme Bluetooth speaker powered on and paired, with its blue glowing Energy button highlighted.

Ultimately it’ll go darkish, as proven subsequent, pointed at by the inexperienced arrow.

Picture of the JBL Xtreme speaker powered OFF, showing its dark Power button highlighted.JBL Xtreme Firmware Replace: JBL Xtreme speaker powered OFF, displaying its darkish Energy button highlighted.

The Xtreme might or might not flip itself again on once more after the improve. Ours didn’t. So if, like ours, yours didn’t come again up, then go forward with the subsequent step (Step 10). But when yours did come again on-line although, then skip Step 10 and decide up with Step 11.

10. Energy On the JBL Xtreme

Press the darkish Energy button to show this Bluetooth speaker on once more. It ought to once more pair together with your cellular system the place you’re operating the JBL Join Plus app. The Energy button turns strong blue together with your speaker has efficiently paired once more together with your pill or telephone, as proven subsequent.

Picture of the JBL Xtreme Bluetooth speaker powered on and paired, with its blue glowing Power button highlighted.JBL Xtreme Firmware Replace: JBL Xtreme Bluetooth speaker powered on and paired, with its blue glowing Energy button highlighted.

11. Press the Executed Button

Together with your Xtreme efficiently paired to the JBL Join+ app once more, press the inexperienced Finished button within the Join+ app, as proven within the final screenshot above.

The app then shows the JBL Xtreme speaker standing display as soon as once more. Nevertheless, this time, observe that there’s not the orange circled rationalization level (!), as proven subsequent. This means that the firmware replace succeeded and that the speaker is now operating the present firmware model.

Picture of the JBL Connect Plus app on iOS, showing the JBL Xtreme Bluetooth speaker Home screen.JBL Xtreme Firmware Replace: JBL Join Plus app on iOS, displaying the JBL Xtreme Bluetooth speaker House display.

12. Executed!

You’re now efficiently up to date the firmware to the present model in your JBL Xtreme Bluetooth speaker. Take pleasure in the brand new multi speaker connectivity options.

JBL Xtreme Firmware Replace Incessantly Requested Questions (FAQ)

How do I Apply JBL Xtreme Firmware Replace 2017, 2018? 

The right way to Replace JBL Xtreme Firmware?

The firmware upgrades for 2018 and past are put in as described on this publish.

How do you Set up the JBL Xtreme Join+ Replace? 

The Join+ replace refers to a model of the JBL speaker firmware launched within the 2017-2018 time-frame, that permits Join+ features on later mannequin JBL Bluetooth audio system. This firmware allows connecting a number of audio system collectively so that each one of them play the identical content material, just like the multi-room music function on the Alexa and Google Residence sensible audio system. You put in this specific firmware simply as you do some other firmware model, as described earlier on this submit.

How you can Get the JBL Xtreme Firmware Replace Obtain?

Once you replace a JBL speaker by way of the Join+ app, the app mechanically downloads the newest firmware to your cellular gadget.  Then, it transfers it to the speaker. So that you needn’t obtain the firmware file your self.

How do you Run a JBL Streme Firmware Verify?

Every time you run the Join+ app on a cellular system to which a JBL speaker is paired, the app routinely checks to see if the related speaker has the newest firmware out there.  If it doesn’t, it’s going to immediate you to carry out the firmware replace, simply as we did on this submit.

Learn how to Replace JBL Xtreme to Join Plus?

How do I Carry out a JBL Xtreme Improve to Join Plus? 

Present and later variations of JBL Bluetooth speaker firmware help Join Plus performance.  So, updating your speaker to the newest firmware, as mentioned above, mechanically allows the Join+ function in case your speaker is suitable.  Thus, to get Join+ on audio system for which it has been launched, simply comply with our process above for firmware upgrading.

Associated Posts

References

Revision Historical past

  • 2019-01-04: First revealed.

 

About the author

Admin